I have installed Windows 7 Home Premium with 2 500G hard drives and wanted to setup a RAID 1 configuration. When I change the option in the BIOS to RAID, the OS does not boot and it goes straight back to POST. I have uninstalled RST and reinstalled with no success. Here is some of my system information:
Board
Manufacturer Intel Corporation
Product Name DH77EB
Version AAG39073-305
Serial Number BQEB33300089
BIOS Version EBH7710H.86A.0101.2013.0516.1649
BIOS ROM Size 8192 KB
BIOS Release Date 5/16/2013
Processor
Manufacturer Intel(R) Corporation
Processor Name Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz
Processor Speed 3.4 GHz
Stepping 9
Form Factor Socket LGA1155
Hyper-Threading Technology Status Disabled/Unsupported
Memory
Error Correction None
Maximum System Memory 32 GB
Memory Slots 4
Socket Designation DIMM3
Current Memory Type DDR3
Installed Size 4096 MB
Memory Speed 1333 MHz
Socket Designation DIMM1
Current Memory Type DDR3
Installed Size 4096 MB
Memory Speed 1333 MHz
Socket Designation DIMM4
Current Memory Type DDR3
Installed Size 4096 MB
Memory Speed 1333 MHz
Socket Designation DIMM2
Current Memory Type DDR3
Installed Size 4096 MB
Memory Speed 1333 MHz
Onboard Devices
Device Type Video
Device Description Intel(R) HD Graphics Device
Device Status Enabled
Device Type Ethernet
Device Description Intel(R) 82579V Gigabit Network Device
Device Status Enabled
Device Type Sound
Device Description Realtek High Definition Audio Device
Device Status Enabled
Hard Drive
Model ST3500413AS
Max. Transfer Mode UDMA 6 (ATA/133)
Active Transfer Mode UDMA 5 (ATA/100)
S.M.A.R.T. Status Enabled
Size 465 GB
Model WDC WD5002AALX-00J37A0
Max. Transfer Mode UDMA 6 (ATA/133)
Active Transfer Mode UDMA 5 (ATA/100)
S.M.A.R.T. Status Enabled
What do I need to do in order to get the RAID function working?