D54250WYKH - WiDi disconnects immediately after connecting
I'm using an Intel Dual Band Wireless-AC 7260 Plus Bluetooth adapter and I have the latest bios and the latest drivers installed under Windows 8.1 64-bit, so everything is up to date, but when I trying...
View ArticleRe: i2c directly under Yocto
In fact I can give you a c-source project that will work with the Adfruit Oled display.I will try to attach it here.Unzip it to a directory on your Galileo and then run 'make' and then run...
View ArticleRe: disconnect USB 5V In?
Hi Tony, It might be possible depending if the hardware design supports it. I have one Galileo board that powers down when the USB is connected, and another one that stays on when the USB is connected....
View ArticleApplication will not connect
I have ScreenBeam Wireless Display to connect the WiDi. I open the Intel WiDi application, hit connect and ScreenBeam verifies the security code and tries to connect to the WiDi app and I get a message...
View ArticleClik here to view.
Re: Calling Lois H NUC Bios Entry Problem
OK folks, pleased to report the saga is finally over!! dougho needs commending for holding out for a driver issue......... Well done!! My Vendor changed the driver I was using, to the Realtec driver...
View ArticleRe: problem with BT and WIFI WIN8.1 N7260
I just updated my access point because of what happened afterwards I now for sure the problem is driver related to the N7260 and it has to do with something interfering between bluetooth and wifi.The...
View ArticleGalileo - Windows 8 running Arduino Blink Sketch (error computing)
Trying to Run an Arduino Sketch on the Galileo Intel Development Board.Windows 8 Arduino Sketch BlinkUsing Serial Port 3 assgined to Gadget Serial.Intel Galileo Card Selected.Firmware updated...
View ArticleRe: Firmware 26 for Haswell Nuc - still massive problems with USB 3.0...
@joe_intel: would you please appreciate users conclusions, and do accept essential BIOS Problems with the NUCs? No need to discuss about "drivers". Sometimes it seems, that several users have more...
View ArticleRe: D54250WYKH USB3 boot issues with VMWARE 5.5 u1
1. Suggest setting USB ports not needed for BIOS or boot to "No Detect" under Devices/USB/USB Ports to minimize number of devices the BIOS must enumerate. Make sure you leave at least one port from 01...
View ArticleRe: DN2820FYKH NUC No video display (no bios screen)
I tried another memory & it worked. My memory was bad.
View ArticleRe: Firmware 26 for Haswell Nuc - still massive problems with USB 3.0...
Could you elaborate on how many USB devices and hubs, if any, you have connected to the NUC, and on what ports they are connected? Also, what are the make/model/part# of USB sticks have you tried? I...
View ArticleNo video display when f2 (enter setup) is tried NUC DN2820FYKH
I have this NUC setup for openELEC & it is working. I can enter the boot device menu at startup by pressing f10. But I am unable to make any changes to my bios as it has no video when I press F2 at...
View ArticleMaximum USB Device Count on Intel 8 Series Controllers?
I’m troubleshooting some USB scaling issues on the Intel 8 Series chipset. Please advise what is the maximum number of USB devices that can be connected to the Intel USB 3.0 xHCI controller on the 8...
View ArticleRe: D54250WYKH - WiDi disconnects immediately after connecting
I solved the problem somehow when I completely removed the graphics driver and installed the oldest one, then I installed the latest without removing the previously installed driver, now the NUC can...
View ArticleClik here to view.
Re: D54250WYKH - Flashing black screen when using right-click menu
I removed the Intel right-click menu from the registry and now everything is working and there's no more flashing screen when I use the right click. So it's a driver issue and it needs a fix, but if...
View ArticleRe: Mount the RAID partition that is created by Intel Rapid Storage Technology
What is it that you are trying to rebuild, then?
View ArticleRe: Trying to update BIOS DZ77GA-70K
Thanks again Scott...Was hoping not to have to do that, a bit scary...but I'll give it a go. Would you say I should update to current BIOS in increments since I have a very early BIOS or should I just...
View ArticleRe: Help with setting up SAS/SATA in SR1550ALSASR
Server Products — Hardware, Memory, and Operating System Compatibility only shows 3.5" sas, and all pretty old models. Do you have anything 600GB or smaller, 15k RPM, 16MB cache?
View ArticleRe: Trying to update BIOS DZ77GA-70K
I would recommend that you do this in 2-3 steps. Install BIOS 45 first using the recovery process and then go to the latest BIOS in 2-3 steps using the F7 or EXE methods. There shouldn't be any issues...
View ArticleRe: i3 540 graphics
If you would like to move this to the server forum, I do have another question. I have loaded the driver and it is working better than the generic, but is there any way to assign more RAM to the video...
View Article