Re: Can't connect to Edison by browser after WIFI configuraion
what i think is that after wifi configuration, in next time, the wifi should be setup automatically. And still can't connect to the device information pge.
View ArticleRe: D34010WYKH - Cannot set resolution of 1920x1080
Update: I have installed Linux Mint v17 64bits with xbmc and had no problem setting resolution of 1080p through the receiver. At this point I have to believe the problem is in the Windows Intel...
View ArticleRe: USB 3.0 external Hard Drive not detected after computer starts up, USB...
just received a message from Gigabyte recommending l update to bios version: F14b will sort this once lm back home in a few days.. l just hope l can use @bios and that sorting it out is simple, not had...
View ArticleRe: How to recover Edison firmware
Um..... both of those methods require logging in as root (the account with the unknown password). I mentioned this elsewhere, but DFU drivers/instructions are still needed to flash firmware on Edison's...
View ArticleRe: Intel Server Board S5520SC will not see PCI-e video card
I moved the video card to slot 4 and same result. no video out. I will double up the power supply, and provide a external 500W power supply specifically to the video card, and let the 1000W system...
View ArticleClik here to view.
Re: Cannot Acecss Galelio LINUX OS
Negative. I've tried that without success. Attached is my cable. It was extremely difficult to find it in my nearest local hardware / electronics store. It was custom made for me since there is no...
View ArticleRe: Any plans to improve Ethernet interplay with Arduino sketches?
I had debian running on the Galileo already sometime ago. Unfortunately, the closed source software I wanted to use at that time used some MMX instructions, which the Quark SoC has not implemented. But...
View ArticleRe: Any plans to improve Ethernet interplay with Arduino sketches?
you have reason I am now developing a tomcat application for Galileo, feeding a mysql db through the Arduino sketch just for fun
View ArticleClik here to view.
Re: Does Intel Edison support SD UHS-1 or UHS-2?
Sergio .... the question is what SD speeds does the Intel Edison module support? What is the fastest speed that the Edison Arduino shield will support? In particular I'm designing a custom shield, and...
View ArticleRe: Any plans to improve Ethernet interplay with Arduino sketches?
that is a nice example.how do you feed the data to the sketch?
View ArticleRe: Any plans to improve Ethernet interplay with Arduino sketches?
Application Tomcat8 in Galileo With Debian and MySqlstill developing but to already have a base of how it works
View ArticleRe: D54250WYK, Samsung U28D590D, 4K-resolution not working
Still no response? I have the same issue using D34010WYK with Samsung U28D590D monitor. Please resolve this. Was this product mis-advertised on this page Intel® NUC — Setting up multiple displays when...
View ArticleMicro SD makes my Galileo disappear in the Device Manager
When I have my Micro SD put into my Galileo Gen 2, and then turned on, then it can't be found in the Device Manager. I have a "CDC Serial" under Other Devices, but it doesn't show up as a Galileo. On...
View ArticleRe: D54250WYKH with 0028 BIOS, access to "Processor cores" settings
Hi, I'm having the same problem too... using D54250WYKH (BIOS: 0028) the processor always stay at 1.3Ghz using High Performance Mode (TURBO just doesn't work no matter what), while turning EIST off...
View ArticleRe: Wireless N 7260 driver 17.0.5 BSOD on 8.1
The 17.1.0 cannot get the speed like 17.0.2, and the wake-up issue still exists (but less frequently)so I tried the 16.10 that you gave,even poor speed than 17.1.0 and I just tried 17.0.6, BSOD... When...
View ArticleClik here to view.
Re: Micro SD makes my Galileo disappear in the Device Manager
this probably is not loading the driver g_serial try copying the files to the sd boot again
View ArticleRe: Intel NUC D54250WYKH not recognizing 2.5 SATA drive (Samsung M9T)
I haven't noticed that so far, but the 2.5 SATA drive is my secondary drive, I'm booting of an mSATA SSD installed. Unfortunately my 30 days return limit from Amazon has expired already so really...
View ArticleRe: Intel NUC D54250WYKH not recognizing 2.5 SATA drive (Samsung M9T)
Same here. I have a Crucial mSATA I run the OS off of. But whatever is wrong with the controller for the 2.5" was crippling my system like crazy. For the last couple of days I've had the WD Red drive...
View ArticleIs there a device to safely shut down the NUC on power failure?
I am building a guitar pedalboard with an NUC running audio software. I would like to rig up a way to safely shutdown or hibernate the NUC when I kill the power using the 120VAC switch I'll install on...
View ArticleWireless card stops working after hibernate with 17.1.0.0
I just updated to 17.1.0.0 and found that now my wireless card no longer works after I resume from hibernation! I have a Dell XPS 15-9530 running Windows 8.1 Update x64 with an Intel Dual Band...
View Article