Re: USING A GY80 IMU WITH THE EDISON ARDUINO BOARD
Hi Kurt,My library is in the same place. I didn't try hunting around. Thought it was like the regular arduino IDE. Thanks for trying out the code.
View ArticleIntel HD Graphics x Nvidia Optimus x 3D Software Problem
Hi,I bought a notebook with processor Intel Core i7 4810MQ. This notebook comes with a Nvidia Card Geforce 980M, There is that Nvidia Optimus program installed which is supposed to switch cards when im...
View ArticleRe: D54250WYK, Samsung U28D590D, 4K-resolution not working
Since Intel's reps have been suspiciously quiet on this thread my next step would be to escalate through their customer service. Guys, let me know what your result on exchange/return is and I'll post...
View ArticleI have installed the latest firmware 3.8.7-yocto-standard , I can't do the...
I have installed the latest firmware 3.8.7-yocto-standard , and I can't do the telnet anymore . After i have uploaded the sketch to activate the telnet server with the following code below : void...
View ArticleRe: A disk read error occurred - D54250WYK
OK I have installed the Rapid Storage Tech package and will monitor.
View ArticleSolar Powered Edison concept - power considerations
Okay here is a concept for the group. I am wondering if Edison could be solar powered, and I am asking what kind of considerations would need to be made to ensure that it provides enough power to an...
View ArticleRe: Auto scaling issue in Full-Screen Mode with Intel HD 4600 graphics
11/21/2014 Still an issue. Maintain Display Scaling is only option available.
View ArticleClik here to view.
Re: Which is the maximum input voltage tolerance for GPIO port?.
"less" doesn't damage anything - the most important You are right, normally +5% is a conservative givenness and there are a lot of systems getting along with let's say 10% tolerance and maybe more....
View ArticleRe: Native Edison kernel compile successful, kernel hangs without error
I did the same as you did with AlexT's kernel and gladly it has the snd_usb_audio module. Here it also works fine with ubilinux now. You need no Yocto environment to extract the data from the opkg...
View ArticleRe: Virtual memory is @ 100% if i run a game at a different resolution than...
It looks to me, tentatively, like this may have been fixed by some update around two weeks ago. Stay tuned.
View ArticleRe: Quark MCU
Does the Quark MCU use a part of the 1GB memory of Atom processor or does it have its own memory?It would be great to let a sketch communicate with the Linux side within a common memory region, is it...
View ArticleRe: Is there a tutorial on how to replace a broken wireless antenna connector?
Thanks. I ended up purchasing a pair of laptop wireless mini pci/pci-e internal antennas. I kept the antenna plugged in that I didn't destroy, and just strung up one of the new ones through the top...
View ArticleRe: Does Edison support Audio and Video?
@AlexT:In addition to the video output variants you have already mentioned i think "DisplayLink" should not be forgotten. I have such a monitor, it has to be connected to usb and it is supported by the...
View ArticleRe: Connecting Edison to WIFI
So far so good but how long is the "busybox udhcpc -i wlan0" command supposed to run?
View ArticleRe: Does Edison support Audio and Video?
Maybe the MinnowBoard is what you're looking for?
View ArticleRe: Connecting Edison to WIFI
AriGoldnow that we know that the settings are correct - you can make it persistent withsystemctl enable wpa_supplicant upon reboot, it should automatically connect to your network.ps: which setting was...
View ArticleClik here to view.
Re: USING A GY80 IMU WITH THE EDISON ARDUINO BOARD
I finally got it to read the GY80. seems to be either my bread board or loose pins or a combination of both. I've even been able get processing to read the data some what.Thanks for the help
View ArticleRe: RMM4 JViewer not working via Citrix or VNC?
The RMM4 connects via a enbeded web server.Interner Explore or firefox should allow you to connect.
View ArticleRe: Serial problem with edison
freshbirdtww have you looked at all the examples in the Getting Started sectionIntel® Edison: Sketches and Code Examples Also, some of these threads might...
View Article