Re: Intel 7260 Code 10 after installing lastest drivers on win8.1 ( 17.0.6.1)
It's an issue with the driver intel provides and windows 8/8.1. I gave up and switched to a different card brand. If you are interested in trying a work around, I did come across this other thread...
View ArticleRe: BSP compilation is failing.
Hi I am using ubuntu 12.04. No this libarchive package was the first error. I tried doing a clean no effect. Thankshanumant
View ArticleRe: BSP compilation is failing.
Sorry If I misunderstood the question. This is first time I am trying to compile the BSP.
View ArticleFix Display Power Saving Technology
Hi all: I purchased my laptop two months ago and realized today that the battery was in the whole time, even though I used the laptop as a desktop replacement and had it plugged into AC. I shut...
View ArticleRe: Intel AC7260 problems
Well the last update (dec 29th) was in the right direction. Before the card couldn't connect to anything. Now it actually connects, the dropouts are less frequent and less dramatic (just a small drop...
View ArticleRe: Intel WIDI trouble
System Information report written at: 01/03/15 11:41:30System Name: SAMSUNG[System Summary] Item ValueOS Name Microsoft Windows 8.1 ProVersion 6.3.9600 Build 9600Other OS Description Not AvailableOS...
View ArticleRe: Intel AC7260 problems
Ok I did some streaming. It ran like it should for a couple of minutes but then the speed dropped and it stuttered ireversibly. And I was wrong about the 300 kB/s cap, it was just a fluke. But still...
View ArticleClik here to view.
Re: Updating Driver Intel IMPI Interface
I have a Gateway FX530XV. I am using Windows Vista Home Premium 32 bit. I was using the Winzip Driver Updater. The problem seems to have resolved itself. I ran the Updater yesterday and the result...
View ArticleRe: SSD 530 2.5'' 120GB SATA3 is not detected half of the time
I changed the cable, changed the port from SATA6 to SATA2, will see how it goes, thanks.
View ArticleRe: sketch upload fails: "transfer incomplete"
What was the command to delete the files ?
View ArticleRe: sketch upload fails: "transfer incomplete"
Worked it out for others finding this thread "cd /var/log/journal"then"rm -rf *"That will delete all files
View ArticleRe: Rapid Storage Technology interferes with SMART data of hard drives
Which version of RST is used? Does Intel SSD Toolbox show SMART info for the 530 SSD?If no, this version of the RST driver lacks even the standard ATA pass-through (IOCTL_ATA_PASS_THROUGH)...
View ArticleEdison with Arduino expansion board not the same results as Arduino UNO 3
Hi I created a simple Arduino Sketch that samples a signal from an ultrasonic range finder and then lights up LED's based on the distance. The sketch compiles and uploads fine on both the Arduino IDE...
View ArticleRe: Edison UVCVIDEO not found on modprobe.
There is no uvcvideo module in /lib/modules I am sure my Edison flashed properly. I even flashed it multiple times just to be sure.
View ArticleIntel 4600 igpu + Nvidia optimus = nightmare? Need answers about hdmi and gpu...
Hello,Let's start off by saying that I deeply regret buying an optimus system: a Lenovo Y50 with intel's 4600 igpu + optimus nvidia 860m.My main problem with it is that by design, the i4600 gpu can't...
View ArticleClik here to view.
bluetooth n-2230 Stereo headset verbindung
Hallo, ich habe eine frage zu dem Bluetooth adapter N-2230.Gibt es die möglichkeit sein Handy mit dem stereo headset zuverbinden ? So sehen meine Bluetooth Dienste aus.Ich habe Windows 7 Home...
View ArticleDN2820FYK microphone not working
Hi everyone, I am trying to connect a microphone to my brand new NUC, with no luck.A few days ago, I read somewhere that it is not possible to connect a microphone in the combo headphone/mic jack and...
View ArticleClik here to view.
Re: EthernetClient.remoteIP() function
Folks,Finally I was able to answer to myself, let me share my findings.The EthernetClient instance contains a pointer to the socket: "_sock" that is public, so it can be accessed, so once that you have...
View ArticleRe: update fail
You will get a better response in the Graphics forum.I have moved your post there. Doc
View Article