Re: Whats all that yummy stuff on the PCI bus?
I was looking at this myself last night If you try lspci -v you get a bit more info. The signal processor is using the 'pciPTI' kernel driver and when I googled it I found this:...
View ArticleRe: Debian on Edison
My good man, you've done it! Just a simple movement of " www-data ALL=(ALL:ALL) NOPASSWD:ALL" to the end of the file in /etc/sudoers was indeed the solution. Salutations!Jim
View ArticleSYSTEM_SERVICE_EXCEPTION on boot with second displayport monitor
Hello I am using a Dell E7440 with a PR02X port replicator and two Dell P2214H monitors connected through displayport. The laptop has an Intel Core i7-4600u processor with embedded 4400 graphics....
View ArticleRe: How best proceed with overheating i7-4790K?
I tried your suggestions. Thanks. On my machine the CPU frequency was fixed at 4.00GHz and it wasn't obvious that it could be changed anyway. Similarly the power limit was already set for 88w, but I...
View ArticleRe: How to start DN2820FYKH without display?
I have now tested my NUC again a couple of times. If I try to boot it without a display attached, nothing at all gets written in the logs. The booting should be done by elilo, and the linux kernel is...
View ArticleRe: How best proceed with overheating i7-4790K?
I'm sorry to hear that you are still having problems, I think you have it even worse then me. My CPU started overheating when I was around 70-100% CPU-usage, looks like it's already happening for you...
View ArticleClik here to view.
Edison opkg package repo created
Hello everyone, As much as I like the idea of enabling Debian on Edison - and that's something I'm going to participate in to make it even easier to use in addition to all that great work done in the...
View ArticleRe: Question regarding linux and galileo
Obviously one can never support everything out of the box. However, in this case you are lucky: Opencv libs are contained indevkit-x86\sysroots\i586-poky-linux\usr\lib and include files...
View ArticleRe: No Display with NUC 2820 and Onkyo AV at 50Hz
Does the issue occur when accessing the BIOS or only when the operating system starts booting?In other words, can you see the “Intel® NUC” screen?
View ArticleRe: sources for GPIO/SPI/i2c manipulation
Hi acamilo, Check out the file edison-src/device-software/meta-edison/recipes-kernel/linux/files/defconfig. Regards, JPMontero_Intel
View ArticleRe: I need a permit for Intel HD Graphics Logo
Hallo Silvia_Intel,Thank you for your answer.Can you please send me Link from Intel Graphic Departement Contact Adress ?I found on Intel Website nothing Thanks.Regrads,r3un1on
View ArticleClik here to view.
Re: Accessing ADC samples on Intel Galileo
Hi emwaves, You can find the information on how to reach the ADC by following this link http://www.malinov.com/Home/sergey-s-blog/intelgalileo-programminggpiofromlinux in the “Analog Input” subtitle....
View ArticleHow do I get the image for my Edison using Windows 64bits?
I saw in the introduction video that an image need to be download from my PC into my Edison, but I can't find the download of the Image using Windows 64bits. Might somebody give me a tip, where I can...
View ArticleRe: Battery level
Hi faceplant, There is no other way, ADC is required as you can see in the Edison Arduino Hardware guide page 6. It was not added to the breakout board and if you designing your own breakout board and...
View ArticleRe: Wirelessly program Edison
Hi sl3,Currently, we don’t have an existing script that wirelessly programs the Edison.RegardsSergio
View ArticleRe: Plex server causing Linux kernel panic - not syncing: Fatal machine check...
Let us know about the result.
View ArticleClik here to view.
Re: How do I get the image for my Edison using Windows 64bits?
Hi cristhianvs,The link to downloading the image for Edison using Windows can be found here https://communities.intel.com/docs/DOC-23242. RegardsSergio
View ArticleRe: sources for GPIO/SPI/i2c manipulation
Hi vteferrer, I’d suggest you read more documentation to get more familiar with the Yocto project and file I've suggested, please visit https://www.yoctoproject.org. Regarding the Edison documentation...
View ArticleRe: I have bought a new 55 Inch LED LG 55UB850T , I am not able to find my TV...
Did it work before (with older driver perhaps)?If it is not firewall or other security feature, then it has to be driver related, assuming the TV is enabled...I see in the screenshot the Teredo...
View Article